How to Read a Diamond Clarity Plot When Buying a Lab-Grown Diamond Ring

How to Read a Diamond Clarity Plot When Buying a Lab-Grown Diamond Ring

A diamond clarity plot gives you a way to find the features a laboratory chose to record. The diagrams can help you ask whether a small mark is near the middle of the stone, along its edge or better viewed from below. The answer becomes more useful when you can match that location to the actual diamond in your shortlist.

Start with the document and its legend, then connect the diagram to a clear view of the stone. This guide walks through that process and shows how two diamonds with the same clarity grade can prompt different questions.

Confirm which document describes your diamond

Open the complete document for the selected center diamond. Check the issuer, document name, issue date and report number. Then compare the stated shape, dimensions and weight with the option you are considering. IGI's guide to its laboratory-grown diamond report describes those details and says that a diagram of clarity characteristics may be included. (IGI)

If the document is from IGI, enter its number in IGI's official lookup and compare the returned information with the copy you received. Then ask the seller how the physical stone is matched to that record. If the document lists a girdle inscription and the inscription can be accessed, ask whether it can be checked. This separates verifying the record from identifying the stone offered to you. (IGI)

Format depends on service and date. GIA currently describes its quality assessment for eligible colorless to near-colorless lab-grown diamonds using Premium and Standard categories. Its separate Laboratory-Grown Colored Diamond Report lists a plotted clarity diagram. Use the fields on your particular document, and ask the issuer or jeweler about any format you do not recognize. (GIA)

Orient the crown and pavilion views

Where a plot has two diagrams, locate the crown view first. It represents the diamond from above. Use the table, the large central facet, and the outer outline as landmarks. The pavilion view shows the underside. GIA's plotting guide explains that the diagram matches or approximates the shape and facet arrangement of the diamond being assessed. (GIA)

Work from the labels and facet lines before comparing screen positions. In the top view, describe a feature as near the table, toward the outer facets or close to the perimeter. Ask the jeweler to orient the stone the same way before pointing out that location in a video. If a feature is easier to see from below, request that view as well.

Use the plotted position as an approximate projection. When two marks appear in nearby areas across the two views, ask whether they refer to the same characteristic. The report helps you navigate to the area. The feature's depth, extent and behavior as the stone turns need direct observation.

Follow the legend and read the comments

Find the key to symbols on the document you are reading. Match the shape and color of each mark to the wording beside it. On GIA's illustrated plotting examples, red commonly indicates an inclusion. The report's own key supplies the convention for its marks. The ink color serves as a code, while the feature's actual contrast belongs to the examination of the diamond. (GIA)

A crystal is a solid inclusion. A feather describes a break in the gem, and a cloud groups many tiny pinpoints. These names describe features with a range of appearances. A gemologist can show you how a specific crystal or feather looks at different angles, including whether you see it clearly from above. (GIA)

Read the comments after checking the marks. GIA explains that some faint or widespread characteristics may appear in comments rather than on its diagram. When you see a brief note about an unplotted feature, ask whether and where the feature can be observed. Avoid treating the visible marks as a complete inventory. (GIA)

Understand how the five grading factors work together

GIA's clarity guidance describes five factors used with observation at 10× magnification. Size considers how substantial a feature is. Number considers the features and, when relevant, their visible reflections. Position concerns where they appear. Nature describes the kind of characteristic. Relief describes how strongly a feature contrasts with the surrounding diamond through brightness, darkness or color. (GIA)

The factors work together and their importance depends on the stone. For example, position may make a feature near the table easier to notice than a comparable feature farther from the center. Strong relief can make a small crystal stand out. Several faint pinpoints can draw less attention than a single high-contrast feature. The number of marks alone gives you an incomplete comparison. (GIA)

Check visibility, transparency and fit separately

Use the plot to locate a feature, then ask whether it is visible without magnification when the diamond faces up at a normal wearing distance. Agree on the distance and lighting rather than relying on the phrase eye clean by itself. Request both a close view that identifies the feature and an ordinary view that shows the whole ring.

If the diamond looks hazy across several angles, ask for an assessment of its transparency. GIA notes that some internal graining can affect transparency. A sparse plot alone gives limited information about how light travels through the whole stone. Ask whether the appearance persists in another ordinary lighting condition and whether the examiner can identify its cause. (GIA)

A feather near the girdle raises a separate question about mounting. GIA describes chipping risks involving some surface-reaching features and vulnerable edges. Ask whether the feature reaches the surface, how far it extends and where the planned prongs would sit. Have the jeweler assess the feature and mounting together before relying on coverage as a solution. (GIA)

Work through two hypothetical comparisons

In the first hypothetical case, two round diamonds carry the same VS2 grade from the same issuer. Diamond A has one plotted crystal near the table. Diamond B has several smaller marks toward the edge. Ask to see the actual contrast of A's crystal and B's features from above, at matched scale. Then compare ordinary views. You may notice a different feature first than you expected from the diagrams.

Two hypothetical readings and the next question for each
Comparison What the document shows What to ask the jeweler
Same VS2 grade A crystal near the table versus several smaller marks near the edge Can I compare these features face-up and at ordinary distance under the same lighting?
Different plot detail Few marks with an additional-cloud comment versus several individually plotted marks Does the apparent haze persist in diffuse light, and what does direct examination show?

In the second hypothetical case, one report shows few marks and mentions additional clouds in its comments. A second report shows several individual marks. If the first diamond also looks slightly hazy in a video, request a repeat view in diffuse light and a direct transparency assessment. The extra view can help determine whether the appearance persists. Ask the examiner to explain what the comments add to each comparison.

Send the jeweler a focused question

Tell the jeweler which diamond and report you are comparing, then point to one location in the diagram. Ask what the feature looks like without magnification, whether it changes as the diamond turns and whether it affects the planned setting. If you are deciding between two stones, ask for the same viewing conditions and the same camera scale for both. Keep the reply with the report number and the ring option so you can revisit the exact comparison before you order.

Frequently asked questions

Do more marks mean a lower clarity grade?

A laboratory considers several factors together, including the size, position, nature and relief of characteristics. The number of marks on a plot shows only part of that assessment.

Does a red mark mean the inclusion itself is red or dark?

Red ink is a plotting convention when the legend assigns it that meaning. To judge actual color or contrast, ask to see the feature in the diamond under suitable lighting.

What if my lab-grown diamond document has no clarity plot?

Check the issuer, service and issue date, and read the fields and comments that are present. Ask for representative views of the selected stone and professional observations about any feature that concerns you.

Can a clarity plot tell me whether a prong will cover a feather?

Use the approximate location to start a discussion about the actual stone. A jeweler can assess the feature's depth and surface reach and compare its position with the proposed mounting.

Explore AIMINIA lab-grown diamond rings and keep the details for the option you prefer. If a plot accompanies the selected stone, use it to identify the feature you want to discuss. Request the viewing conditions and setting details that let you decide how that feature matters to you.

Related reading

Diamond reports and verification · What you can actually see in diamond color and clarity · Buying a lab-grown diamond ring online.